Causes: screw pump installation is not strong or the pump installed too high; motor ball bearings damaged; pump spindle bending or spindle with the motor is not the heart, not parallel and so on.
Treatment: install a steady pump or reduce the installation height of the pump; replace the motor ball bearings; correct the bending of the pump shaft or adjust the relative position of the pump and the motor.
2. Drive shaft or motor bearing overheat:
Reason: lack of oil or bearing rupture.
Approach: add oil or replace the bearing.
3. Screw pump does not water:
Reason: pump and suction pipe did not fill the diversion; moving water level lower than the pump drainage pipe; suction pipe rupture.
The sealing surface between the screw and the housing is a curved surface.
There are unsealed areas such as ab or de on this surface and a number of triangular notches abc, def with the groove portion of the screw. The notches of these triangles form a passage for the liquid, allowing the drive screw groove A to communicate with the grooves B, C in the driven screw. The grooves B, C, along with their spiral around the back, respectively, and the back of the grooves D, E communicated. Since there are also triangular notches a'b'c 'similar to the front face on the sealing surfaces where the grooves D, E engage with the groove F (which belongs to the other thread), D, F, E will also communicate. In this way, the groove ABCDEA also form a "∞" -shaped sealing space (such as the use of single-head thread, the groove will be along the axial disk Rao screw, the suction port through, can not form a seal). Not hard to imagine, in such a screw, will form a number of independent "∞" -shaped sealed space, each sealed space occupies the axial length exactly equal to the lead of the tired rod t. Therefore, in order to make the suction and discharge of the screw, the length of the screw thread should be longer than one lead.
Bmw Car Mats, Our custom BMW Easy Clean Car Mats are functional Weather Resistance Car Mat.We created a proprietary high-quality rubber material called TPV to be odorless, extremely durable, and all-weather. Tarnished carpet from mud, snow, and water is a thing of the past with our custom BMW floor mats.They are precisely molded for a custom fit for your vehicle upon installation, no trimming required.Included in the design are fixing points to hook directly to the factory anchor spots so the floor mat never slides around or moves.Rubber floor mat that perfectly fit! Does not need trimming. All weather protection from mud, sand and snow.Does not shrink, warp or curl like plastic floor liners. Globral approved TPV rubber that does not have bad odor. Easy to install and easy to remove. Attaches perfectly to the fixing points on floor. Provides good foot traction and does not move or slide.Fandewei all-weather 3d Custom Car Mat provide affordable year-round protection from mud, sand and snow to the carpet floor of your vehicle. The tailor-made floor mats are available for most cars, trucks and SUV`s. These set of mats perfectly cover the floor area of the front and rear seats. Weather Resistance Car Mat Easy Clean Car Mats Bmw Car Mats
Bmw Car Mats,Weather Resistance Car Mat,Easy Clean Car Mats,Bmw 5 Series F10 Car Mats
Henan Kapai Import and Export Co.,Ltd , https://www.cnkapai.com