Waste Scrap Copper Wire Cable Recycling Recycle Line/Machine, Copper Wire and Cable, Wire and Cable Granulator

MOBILE:86-13506249546

Brief introduction of our machine: 
This kind granulator is dry-type(no water when process), is an environmental-friendly equipment, designed with advanced technology, is used to crush waste wires and cables, highly separate the wires and plastics! You can get 100% copper granules(doesn't include any plastics in it)! It makes full use of all kinds of waste wires, thus bring high economic efficiency! 

Main features and advantages: 
1. It is dry-type, don't need to add water when process. 
2. The range of waste wires diameter our machine can process is ≤ 10cm. 
3. There is no need to classify the waste wires, and can be put into the machine together, which highly improve the working efficiency! 
4. With high separating rate— 100%, you can get 100% pure copper granules and 99.9% plastics. For this feature, our machine is unparalleled by other machine! We can promise you this! 

Main technical parameter of this model: 
Model: NMB-Sf-B1
Capacity: 100kg/h
Motor: 380V, 50Hz, 3Phase(if you need special motor, we can also produce according to your needs)
Main motor power: 30kw
Dimension: 3.9*2*2.2m

Other models of our machine: 
Our machine has two models distinguished from its appearance! Each model has three kinds, having different capacities! If you are not satisfied with this model, we have others for you to choose! Please see the following tabulation! 
x

Waste Scrap Copper Wire Cable Recycling Recycle Line/Machine, Copper Wire and Cable, Wire and Cable Granulator

MOBILE:86-13506249546

Brief introduction of our machine: 
This kind granulator is dry-type(no water when process), is an environmental-friendly equipment, designed with advanced technology, is used to crush waste wires and cables, highly separate the wires and plastics! You can get 100% copper granules(doesn't include any plastics in it)! It makes full use of all kinds of waste wires, thus bring high economic efficiency! 

Main features and advantages: 
1. It is dry-type, don't need to add water when process. 
2. The range of waste wires diameter our machine can process is ≤ 10cm. 
3. There is no need to classify the waste wires, and can be put into the machine together, which highly improve the working efficiency! 
4. With high separating rate— 100%, you can get 100% pure copper granules and 99.9% plastics. For this feature, our machine is unparalleled by other machine! We can promise you this! 

Main technical parameter of this model: 
Model: NMB-Sf-B1
Capacity: 100kg/h
Motor: 380V, 50Hz, 3Phase(if you need special motor, we can also produce according to your needs)
Main motor power: 30kw
Dimension: 3.9*2*2.2m

Other models of our machine: 
Our machine has two models distinguished from its appearance! Each model has three kinds, having different capacities! If you are not satisfied with this model, we have others for you to choose! Please see the following tabulation! 
x

Cutting Material: Cr12MoV, Heat treatment

Cutting type: Hydraulic / Mechanical controlling cutting

Total motor power: 18.5 KW

Forming Power: 7.5KW Bending Power: 4.0KW

Cutting Power: 4.0KW Conical Power: 3.0 KW

Material of rollers: 45# steel, quenched HRC 58-62

Material of shafts: 45# steel, adjusted

Step of rollers: 13+1

Applicable Span: 5m~28m

The depth of the groove: 175 mm

Operating factor of the panel: 70 %

Thickness of the Panel: 0.8-1.5mm

Working Speed:

Straight Sheet: 15m/minb

Arch Sheet: 13m/min

Seaming: 6m/min

Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement

Controlling system: PLC

Large Span Arch Machine

Large Span Arch Machine, Span Machine, Span Arch Machine

Botou Xianfa Roll Forming Machine Factory , http://www.rollformingmachinecn.com