Hadrdega sheet handing equipment|Centralized feeding
Sheet-type material Receiver Description:In the production process of the plastic molding, it will involve a variety of shapes and powder materialsheet material, it's difficult to achieve suction of materials by Common suction machine  , during unloading, for the poor free-flowing and non free-flowing materials for vacuum conveying, HADRDEGA bothsolutions. HE Series ensures reliable suction machine, dust-free vacuum conveying.
     HE series suction machine can be integrated into HADRDEGA central feeding system can also be used for "independent" use solution from raw material area to the molding machine, whether it is "stand-alone" or "concentration" feeding, HADRDEGA can be thought You provide the ideal solution.
     HADRDEGA HE-type suction machine can be equipped with different specifications of the vacuum unit, the maximum transmission capacity of 1000kg / h. CBE system supplied including floor-mounted vacuum unitand molding machine hopper, dry tank or storage tank system on 43L8 materials receiver.
The sheet material of the receiver filter material unloading and cleaning:
     Poor mobility powder and sheets are used pneumatic valve (Φ250 mm) discharge, the controller can be set through the CBE pneumatic butterfly flips, while the filter bag cleaning cylinder open at the same time as the discharge bag clearance
HE series receivers material polyester bag filter device using the form, using special materials such assilk, polyester powder bag, silk smoothness in shock when cleaning the powder material can more easilyfrom the bag, but you can use compressed air blasting cleaners, the filter bag cleaning more thoroughly.
Vacuum shut-off valve
All the material receivers for CBE systems are equipped with vacuum shut-off valves, when conveying the raw material, vacuum shut-off valve will open to stop the vacuum line, after the conveying, vacuum shut-off valve will close to cut off the vacuum
Material level detection unit
Material position detection for HE series material receiver adopts rotation resistance type detection
Â
Hydraulic Hose consists of oil resistant synthetic rubber for inner tube,braided high tensile stell wire for reinforcement,and weather resistant synthetic rubber for wrapped cover. This rubber hose products have feature of oil resistance, high pressure resistance, high temperature resistance, flexibility, good pulse performance , small deformation pressure , fixed length, convenience usage and maintenance and other characteristics, and they are widely used in a variety of heavy vehicles, engineering machinery, petroleum, coal, electric power, metallurgy, chemical industry, shipbuilding, transportation and other industries.
STRUCTURE:
Tube:Oil resistant synthetic rubber
Reinforcement:High tensile steel braids or sprials
Cover:Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range.
1.The Flexible hose is made of special synthetic rubber and has excellent oil resistance,heat resistance and aging resistance.
2.The high pressure hose has high pressure and superior pulse performance.
3.The flexible pipe has excellent bending resistance and fatigue resistance.
4.The hydraulic pipe is soft to use and deforms little under pressure.
Hydraulic Hose,Hydraulic Hose Fittings,Hydraulic Hose Assemblies,Fiber Reinforced Rubber Hose
Luohe Tiema Hydraulics CO.,Ltd , https://www.hydraulichosesdirect.com