Measuring can
   Measuring cans are precision made, open volumetric calibrating measures. They enable on-site calibration of liquid flow meters, master meters and vehicle tanks, with a high degree of accuracy and reliability.
Â
NOMINAL CAPACITY |
20LITER-CALIBRATED"TO DELIVER" AT 15 DEG C |
NOMINAL DIAMETER |
· 27CM |
NOMINAL HEIGHT |
· 89CM |
PROVER WEIGHT(DRY) |
· 8KG |
MATERIA |
· TYPE 304&316 STAINLESS STEEL |
DRAIN VALVE |
· CENTER DRAIN,1.5 INCH BUTTERFLY VALVE |
DESIGN |
· REINFORCING BANDS TO PREVENT DISTORTION OF PROVER WHEN FULL WITH LIQUID AND WHEN BEING TRANSPORTED |
TEMPERATURE MEASUREMENT |
· STAINLESS STEEL THERMOMETER WELL LOCATED SO THAT CLOSED END IS AT THE APPROXIMATE CENTER OF THE PROVER |
VOLUME INDICATION |
· ALUMINUM GRADUATED SCALE |
REQUIRED SCALE RANGE |
· 600 MILLILITER MINOR GRADUATIONS |
TOLERANCE |
· 0.02% SCALE ACCURACY |
DATA PLATE |
· ENGRAVED BRASS |
GAUGE GLASS FITTING |
· STAINLESS STEEL |
LIFTING LOOPS |
· LIFTING LOOP ATTACHED TO TOP BAND OF PROVER |
FILL |
· STAINLESS STEEL "TOP LODADING-SUBMERGED FILL"PIPE PASSES THROUGH THE UPPER CONE AND EXTENDS TO THE BOTTOM CONE,REDUCING FOAMING WHILE FILLING |
NECK COVER |
· STAINLESS STEEL HINGED LOCKING COVER FOR TOP OF NECK TO PREVENT CONTAMINATION OR DAMAGE DURING TRANSPORTATION.ANOTHER COVER PROTECTS THE GAUGE GLASS FROM ACCIDENTAL BREAKAGE AND CAN BE SECURED WITH A LOCK FOR SAFETY. |
Precision level |
Size |
Maximum permissible |
A first-class metal gauge |
1, 2, 5, 10, 20, 40, 50L |
±0.00005 |
Second-class metal gauge |
1, 2, 5, 10, 20, 40, 50L |
±0.00025 |
Third- class metal gauge |
(1~50)L |
±(0.5~1)*10³ |
1.Most Competitive Price
We are manufacturer,We sell products direct to customers instead of through middleman.We save evry penny for you.
2.Quality Guarantee.
With proffessional team control the produce process,guarantee the high quality.
3.Design and Production.
If you are in special demands, just send us the design paper or products parameter,we will design and manufacture it for you.
4. Faster Delivery.
Since we are a factory with large warehouse,we have abundant products in store.
Â
Â
Ultrasonic Laminate Machine is take advantage of the high frequency vibration wave to transfer two or more material surfaces that need to be soldered. In the case of pressure, the material surface is rubbed together to form the fusion between the molecular layers. From there, ultrasonic laminate machine is widely used in fabric, plastic film, nonwoven etc. The advantages of Ultrasonic Laminating Machine are fast, energy saving, high fusion strength and have a good conductivity. Because different areas have different names, the Ultrasonic Laminating machine is also called Ultrasonic Compound Machine or Ultrasonic Composite Machine.
The advantage of ultrasonic laminating machine
1. it has a short welding time
2. Safety and environmental protection
3. Compare with traditional way, ultrasonic laminating is more cementation, clear embossed surface and has a more three-dimensional relief effect, more high-class.
4. After processing, the finished products are not porous, it`s more waterproof
5. Using flower roll, easy to change, and can sew many kinds of designs. and can make any design according to client`s request.
6.ultrasonic laminate machine is fully automatic, equipped with infrared
|
Frequency |
20KHz |
|
Supply Power |
220V 50KHz |
|
Total Power |
13(KW) |
|
Max Width |
1050mm |
|
Pressure Source: compressed air |
(5MPA) |
|
Material of Frame |
Steel plate connection |
|
Ultrasonic System |
20K 1.8KW 5 sets |
|
Ultrasonic Horn |
Special steel horn |
|
System control |
inverter adjustment |
|
Speed |
0-18M/min |
|
Dimension |
L5700*W3570*H6100 according to different size |
|
Weight |
1200kg |
|
flower roll |
Length, designs based on customers' requirements custom-made |
Ultrasonic Laminate Machine
Ultrasonic Laminate Machine,Ultrasonic Fabric Quilting Machine,Ultrasonic Textile Adhesive Machine,Auto Ultrasonic Embossing Machine
JIEDA Utrasonic Equipment Techonolgy Co.,Ltd , http://www.jiedamachine.com