Product Description
1.Machined and assembled by ourselves to ensure good quality
2.Imported seals and lub to make sure that it has a long lifetime
3.Small size, compact, good appearance
4.Standard seaworthy packing to protect products against damage in transit
|
Diameter(mm) |
12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Action mode | Double action, Eextrusion action, Drawing-in type | Double action | |||||||||
| Working medium | Air | ||||||||||
| Working-pressure(Kgf/cm 2 ) | Double action | 0.5-7.1 | 0.3-7.1 | 0.2-7.1 | |||||||
| Single action | 2.0-7.1 | 1.5-7.1 | 1.0-7.1 | ||||||||
| Ensured pressure resistance(Kgf/cm2) | 10.5 | ||||||||||
| Operating temperature range( ) | 0-60 | ||||||||||
| Operating speed range(mm/s) | Double action | 30-500 | 30-350 | 30-250 | |||||||
| Single action | 100-500 | - | |||||||||
| Joint pipe bore | M5× 8 | G1/8 | G1/4 | G3/8 | |||||||
Product Description
1.Machined and assembled by ourselves to ensure good quality
2.Imported seals and lub to make sure that it has a long lifetime
3.Small size, compact, good appearance
4.Standard seaworthy packing to protect products against damage in transit
|
Diameter(mm) |
12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Action mode | Double action, Eextrusion action, Drawing-in type | Double action | |||||||||
| Working medium | Air | ||||||||||
| Working-pressure(Kgf/cm 2 ) | Double action | 0.5-7.1 | 0.3-7.1 | 0.2-7.1 | |||||||
| Single action | 2.0-7.1 | 1.5-7.1 | 1.0-7.1 | ||||||||
| Ensured pressure resistance(Kgf/cm2) | 10.5 | ||||||||||
| Operating temperature range( ) | 0-60 | ||||||||||
| Operating speed range(mm/s) | Double action | 30-500 | 30-350 | 30-250 | |||||||
| Single action | 100-500 | - | |||||||||
| Joint pipe bore | M5× 8 | G1/8 | G1/4 | G3/8 | |||||||
Stamping parts: The most used in hardware processing refers to the molds for steel/non-ferrous metals and other plates at room temperature, which are formed into a specified shape by the pressure required for processing by a press. Automobile shock absorbers are mainly used to suppress the shock of the spring and the impact from the road surface when the spring rebounds after shock absorption. When passing on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will reciprocate, and the car shock absorber is used to suppress the jump of this spring. If the shock absorber is too soft, the body will jump up and down. If the shock absorber is too hard, it will bring too much resistance and prevent the spring from working properly. In the process of modifying the suspension system, the hard shock absorber should be matched with the hard spring, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder automotive shock absorber stamping parts. A device connected to the vibration-inducing crankshaft to counteract the torsional vibration of the crankshaft (that is, the phenomenon that the crankshaft is twisted by the impact of the ignition of the cylinder)
Stamping parts bracket,Shock Absorber Parts
Ningbo Huilexin Technology Co.LTD , https://www.oemshockabsorbers.com