Application characteristics of re-election equipment and sorting size range
Equipment type | Sorting granularity (mm) | Application characteristics | ||||
general | maximum | Minimum | ||||
The crude grain reselection device | Heavy medium dressing equipment | Vibrating chute Drum sorter Cone sorter Eddy current sorter Heavy medium cyclone | 75 to 6 100 to 6 50 to 6 35 to 2 20 to 2 | 100 300 75 75 35 | 3 5 1.5 0.5 0.5 | The sorting granularity is coarse, the processing amount is large, and the sorting precision is high, and it is suitable for pre-selecting ore with high depletion rate. Medium preparation and recycling process system is complicated |
Rectangular large jig | 5 0 to 10 | 70 | 0.074 | The sorting precision is coarse, the processing amount is large, and the process is simple. Sorting accuracy is not as good as heavy medium | ||
in grain weight selected Assume Prepare | jump Eliminate machine | Side-by-side diaphragm jig Lateral diaphragm rectangular jig Reverberation jig Round jig Lower cone jig Guangdong type jig Trapezoidal jig | 1 2 to 0.1 12 to 0.1 12 to 0.1 12 to 0.1 6 to 0.1 6 to 0.1 5 to 0.074 | 18 18 18 18 20 10 10 | 0.074 0.074 0.074 0.074 0.074 0.074 0.037 | Large processing capacity and high enrichment ratio for rough selection and selection |
Taiwan floating | 5 to 0.2 | 6 | 0.074 | It can separate coarse-grained sulfide minerals, with many products, high sorting efficiency and small processing capacity. | ||
Sand mine re-election equipment | Shaker | 2 to 0.037 | 3 | 0.02 | Small processing capacity, high enrichment ratio, a variety of products, more for selection | |
Spiral concentrator Spiral chute Fan chute | 2 to 0.1 0.6 to 0.05 1.5 to 0.074 | 3 1.5 2 | 0.074 0.037 0.037 | The processing capacity is larger than that of the shaker, saving water and electricity, and the structure is simple. Low enrichment ratio for rough selection | ||
Cone concentrator | 1. 5 ~ 0.074 | 2 | 0.037 | Large processing capacity, water and electricity saving, small floor space, low enrichment ratio, used for rough selection | ||
Sludge re-election equipment | Centrifugal concentrator | 0.07 4 ～ 0.01 | Large processing capacity and low enrichment ratio for coarse mud mining operations | |||
Various belt chutes | 0.07 4 ～ 0.01 | Small processing capacity and high enrichment ratio for slime selection | ||||
Tungsten carbide mixed Metal Alloy Powder is commonly used in PTA (Plasma Transferred Arc) welding. PTA welding is a process that involves the deposition of a hardfacing material onto a base metal to provide wear resistance, corrosion resistance, and improved mechanical properties.
Tungsten carbide is a very hard and wear-resistant material, making it ideal for applications where high abrasion resistance is required. It is often mixed with other metals, such as nickel, cobalt, or chromium, to form a metal alloy powder. These metal alloys enhance the properties of the tungsten carbide and improve its compatibility with the base metal.
The tungsten carbide mix metal alloy powder is typically fed into the PTA welding torch, where it is melted and propelled onto the surface of the base metal using a high-energy plasma arc. The molten powder forms a hard, dense coating that bonds with the base metal, providing excellent wear resistance and protection.
The specific composition of the tungsten carbide mix metal alloy powder can vary depending on the application requirements. Different ratios of tungsten carbide and other metals can be used to achieve desired properties, such as hardness, toughness, and corrosion resistance.
Overall, tungsten carbide mix metal alloy powder is a versatile and effective material for PTA welding, offering superior wear resistance and protection for various industrial applications.
Mixed Powder,Arc Welding Powder,Pta Welding Powder,Plasma Welding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com