
There are many ways to quickly reduce the temperature in the car in the summer, but it is convenient to use the air-conditioner to drop it. It won't attract strange people's eyes, and it won't worry about whether the cooling spray is qualified or harmful. Therefore, the editor will introduce this method for fare increase.
Cooling down the first step: open all windows
The first step to cool down is to open all the windows, because the maximum temperature after the car has reached the maximum temperature of about 70 °C, outside even if the heat is cooler than the car, so open the windows in order to make the car's hot air and Cooler air from the outside world forms convection and the hot air in the car quickly decreases.
Cooling Part II: Turn On Air Conditioner
In the second part, we have to turn on the air conditioner. Two or three minutes after opening the window, the editor will get on the car and turn on the air conditioner. First of all, open the outer loop of the air conditioner. The air volume of the air conditioner should be kept as high as possible, and the air conditioner temperature should be adjusted to the minimum. When the temperature inside and outside the car is similar, the car window is closed and the internal circulation is enabled. In addition, it is best to blow the air-conditioning out of the air upwards. This is because the density of the hot air is relatively small. Once the cold air comes in, the hot air in the car will quickly slip away from the windows and skylights. Although this is a little hot in the beginning, it avoids the excessive load when the engine starts, and the air conditioner compressor can quickly enter the best working condition, so it is the best choice.
How to use air conditioner correctly
Whoever uses air conditioners, but most owners will use it correctly? Due to the harsh environment of use, automobile air conditioners will breed a large number of harmful bacteria. If air conditioners are not cleaned for a long time, they will cause harm to the health of passengers in the vehicle. Therefore, it is advisable that vehicle owners clean the air-conditioning system every summer. In addition, the owners of sand and dusty areas must often draw out the air conditioning filter to clean up, to avoid the air conditioning filter is blocked by sand, debris, affecting the amount of air conditioning and the occupants of the car's health.
Edit summary:
The rapid air-conditioning cooling method introduces this to everyone. In fact, there are many ways to quickly reduce the temperature inside the car, such as spraying low-alcohol alcohol into the car, switching the door method, and using the rapid cooling spray in the car. Cooling, but these methods are not very safe, so editors still recommend that everyone use air-conditioning to quickly reduce the temperature inside the car.
It is a white inorganic pigment with non-toxic, best opacity, best whiteness and brightness, and is considered to be the best white pigment in the world today. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Widely used in coatings, plastics, papermaking, printing inks, chemical fiber, rubber, cosmetics and other industries. It has a high melting point, and is also used to make refractory glass, glaze, enamel, clay, high temperature resistant laboratory utensils, etc.
Anatase titanium dioxide belongs to pigment grade titanium dioxide, which has the characteristics of strong hiding power, high coloring power, and good weather resistance. Mainly used in industrial sectors such as rubber, plastics, papermaking, printing inks, coatings and chemical fibers.
The use of anatase titanium dioxide mainly has the following aspects: Titanium dioxide for papermaking generally uses anatase titanium dioxide without surface treatment, which can play the role of fluorescence and whitening, and increase the whiteness of paper. The titanium dioxide used in the ink industry has rutile type and anatase type. It is an indispensable white pigment in advanced inks. The titanium dioxide used in the textile and chemical fiber industries is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide is not only used as a coloring agent in the rubber industry, but also has reinforcing, anti-aging, and filling functions, and is generally based on anatase.
Anatase Titanium Dioxide,Titanium Dioxide Anatase,Anatase Titanium Dioxide For Rubber,Anatase Titanium Dioxide Powder
Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com