The start of the garbage truck is basically the same as that of a normal vehicle. I believe we are all familiar with it. We must insert the key, place it in a spiral, and light up on fire. Is this still necessary for people to teach? Need to know, according to this method in the long run, it will cause difficulties in the start of garbage. It takes a few fires to start.
The correct ignition method for the garbage truck is: insert the key to rotate to ACC stop, wait for 2 to 3 seconds or so, make the main power relay contact firmly contact, let the first part needs to energize the device power; continue to turn the key to ON, and then Stop waiting for 6 to 10 seconds, let the oil pump relay pull, wait for each sensor to adjust the state, turn the key to START until the engine runs continuously and return to ON. However, for temporary or short-term parking, you can start quickly without stopping.
A noise barrier (also called a soundwall, sound berm, Sound Barrier, or acoustical barrier) is an exterior structure designed to protect inhabitants of sensitive land use areas from noise pollution. Noise barriers are the most effective method of mitigating roadway, railway, and industrial noise sources – other than cessation of the source activity or use of source controls.
Features
1, Soundproof function: sound insulation STC≥30-35
2, Noise absorption function: Using advanced centrifugal glass wool, Average noise reduction coefficient NRC≥0.95
3, Solid and steady: Using aluminum and steel post, wind resistance 1500N/m2
4, Anti-aging and anti-corrosion
5, we provide custom service as our customers` requirements
Railway Sound Barrier,Noise Sound Barrier,Noise Barrier Fence Panel
Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com