Fiat Power Technologies unveiled the Beijing International Road Transport, Urban Bus and Parts Fair and exhibited the F1 and Cursor series of road engines. The three engines will be displayed at the Beijing Exhibition Hall from May 24th to 26th (Booth No. 1003), including one F1A (European 6 emission) and one F1C (Fiveth National Emissions and can meet future Sixth National Emissions) and A Cursor 9 (national five emissions and meet the future six emissions). Visitors can explore the engines exhibited by Fiat Power Technologies through an interactive touch screen application developed specifically for the exhibition, view all the details and gain a more interesting and engaging experience.
F1 series engine
F1 series engines are the flagship series of Fiat Power Technology, which has been derived from 35 years of experience in light commercial vehicle applications. Including two models with displacement of 2.3 liters (F1A) and 3 liters (F1C), the maximum power exceeds 200 horsepower. In addition, the F1 series also offers the best load response, highest torque, and reliability, durability, and maintainability that are consistent with global standards.
F1A
The F1A engine has also begun production in China. The F1A is easy to install and is the perfect solution for light vehicles. This engine can be installed horizontally or vertically. Thanks to the optimized DPF regeneration strategy, the oil change intervals are extended to ensure that the F1A engine is durable.
In addition, it also has some other excellent features: For example, suspended oil pan scheme improves NVH (noise, vibration, etc.). The F1A is the best in terms of fuel economy, and two different solutions are available for subsequent processing systems to meet customer needs: LPEGR + NSC (nitrogen oxide storage catalyzer) and HPEGR + SCR (selective catalysis reduction).
F1A Euro 6 Specifications and technical ready for GB 6/VI
Thermodynamic cycle Diesel: 4 stroke
Air handling: TAA
Turbocharger: WG/VGT
Arrangement: 4L
Bore x Stroke (mm): 88 x 94
Total displacement (L): 2.3
Valves per cylinder: 4
Injection system: Electronic Common Rail Multijet II
Upstream injectors fuel pressure (bar): 1,600
Maximum rating [*] kW (HP): 127 (172)
Maximum torque Nm: 400
ATS (#2 options): HPEGR+DOC+DPF+SCR or LPEGR+DOC+DPF+NSC
F1C
The F1 family of five products displayed on the show represented another best solution for high-load and long-distance transportation. Its performance and durability are at the same level and can meet most of the working conditions. There are two options for this product: horizontal or vertical. At the same time, F1C is the first engine to be equipped with a selective catalytic reduction (SCR) technology on a light commercial vehicle since 2010, which helps reduce fuel consumption.
F1C GBV Specifications and technical ready for GB VI
Thermodynamic cycle Diesel: 4 stroke
Air handling: TAA
Turbocharger: WG
Arrangement: 4L
Bore x Stroke (mm): 95.8 x 104
Total displacement (L): 3.0
Valves per cylinder: 4
Injection system: High Pressure Common Rail (HPCR)
Upstream injectors fuel pressure (bar): 1,800
Maximum rating kW (hp): 107 (146)
Maximum torque Nm: 370
ATS: ecEGR+DOC+DPF
Cursor 9
Fiat Power Technology also demonstrated the Cursor 9-country five-engine, which also technically meets Euro 6C emission standards. Despite only 9 liters of displacement, the superior power density makes the engine comparable to the industry's 11-liter performance. In addition, thanks to the passive regeneration strategy of the DPF, the Cursor 9 has first-rate performance in terms of fuel economy, and the longer oil change intervals and DPF maintenance cycles of the Cursor 9 also reduce vehicle downtime.
Cursor 9 GB V Specifications and technical ready for GB VI
Thermodynamic cycle Diesel: 4 stroke
Air handling: TAA
Turbocharger: WG
Arrangement: 6L
Bore x Stroke (mm): 117 x 135
Total displacement (L): 8.7
Valves per cylinder: 4
Injection system: High Pressure Common Rail (HPCR)
Upstream injectors fuel pressure (bar): 1,600
Maximum rating kW (hp): 287 (390)
Maximum torque Nm: 1.590
ATS: SCR
The use of an exhaust gas recirculation (EGR) system and a relatively simple unipolar turbocharger system ensures high engine reliability, ease of installation and installation. The Cursor 9 Euro VI is equipped with the HI-eSCR system, which is the renowned patented after-treatment technology of Fiat Power Solutions and can also meet the country's six emissions.
In order to comply with Euro 6 C emissions regulations, NEF and Cursor series engines are equipped with Fiat Power Technologies' innovative HI-eSCR technology, which has a nitrogen oxide catalytic efficiency of more than 95%. HI-eSCR represents a breakthrough in selective catalytic reduction technology. Selective Catalytic Reduction technology was pioneered by Fiat Power Technologies' R&D center in Arbon, Switzerland. Since 2005, it has been produced and carried on more than 650,000 engines. Applications include trucks, agricultural machinery and construction machinery.
Fiat Power Technologies provides end products and original equipment manufacturers with engine products equipped with a HI-eSCR system and numerous technical advantages. Emission regulation requirements are achieved by maximizing the efficiency of combustion to reduce particulate matter generation. HI-eSCR eliminates the need to use high EGR rate exhaust gas recirculation systems to reduce nitrogen oxides. This means no loss of efficiency, while achieving high power and high torque density and lower fuel consumption. Thanks to the passive regeneration strategy, there is no need for additional particulate combustion systems, which improves the reliability of the system and reduces the thermal load and mechanical losses of the system, enabling the DPF system to have the longest maintenance cycle at the same level. HI-eSCR technology eliminates the need for forced and parked regeneration of the DPF system: no downtime, no temperature rise, no increase in fuel consumption, and high attendance, not only in all work environments, but also in overall operating costs. In addition, HI-eSCR has no additional heat dissipation requirements, and the post-processing system is compact and easy to install. HI-eSCR technology can also meet the country's six emissions.
Fiat Power Technologies, a subsidiary of Case New Holland Industrial Group, specializes in the design, production and sale of powertrains for road and non-road vehicles, ships and generator sets. The company has more than 8,000 employees, 10 factories and 7 R&D centers worldwide. The sales network covers approximately 100 countries, including 93 distributors and more than 900 service stations. The extensive product line includes six engines with 42 to 1,006 horsepower, a transmission with a torque of 200 to 500 Nm, and front and rear axles with a total weight of 2 to 32 tons. The focus on research and development has made FPT Industrial a global leader in industrial powertrains. (This article comes from Fiat Power Technology)
The multifunction busbar processing machine is the patented product developed by our company. Comparing with the traditional busbar processing machine, this product has the following advantages and features:
1. The punching unit adopts column structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
2. The shearing unit adopts round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
3. The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;
4. This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;
5. The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;
6. This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals;
7. Swappable dies offering extreme convenience;
8. PLC control that is stable and reliable.
Cnc Punching Machine,Busbar Processing Machine,Steel Angle Punching Machine,High Speed Punching Machine
JINAN EURO-ASIA MACHINERY CO., LTD , https://www.sdwindingmachine.com