Nowadays, the tools needed in the production process must be obtained as soon as possible. Using standard tools, modern production plans and strategies have solved this problem. For non-standard tools, it is completely another case. The period from the design to the finished product of a non-standard tool usually takes six to eight weeks. In the case of Walter's "CATexpress" system, Walter Titex demonstrated a completely different approach. Mr. Michael Mai, Walter Titex and Walter Prototyp, responsible for non-standard tools at Walte, said: “We can provide users with the much-needed tools within two weeks.†Normally, non-standard tool projects are the responsibility of these two departments.
It is well known that the application of new materials and the geometry of workpieces are becoming more and more complex, and it is becoming more and more difficult to economically process using standard tools. Its solution is to use non-standard tool processing, a clamping can complete a number of steps. However, in the vast majority of cases, non-standard tools have a long cycle from planning to implementation to delivery. This prompted Walter Titex to study a solution to this increasingly serious problem. With a networked software solution, design, cost estimates, purchase orders, and user file processing can be completed in just a few minutes. According to Mr. Mai, using this system, “multi-stage drills and other tools can be produced in as little as 10 minutes after ordering.†Walter Titex has the basic conditions for necessary production capacity. In order to meet this type of demand, tool specialists have set up a production line that specializes in CATexpress. Mr. Mai emphasized: "The scale of this production line is very large. Even if there is a large demand fluctuation, all production bottlenecks do not occur. It is this way that we can guarantee that users can use the machine tool within 2 weeks after the order is placed. Required tools."
Walter Titex's experts did not turn their attention to production hardware, but instead studied their related logistics issues to optimize the entire system. “For every kind of non-standard tool, although we have not created anything new, we can change the whole approach. Even in non-standard tools, there are still many places where standard parts can be used.†Based on this concept, Walter Titex The experts developed a modular component for the CAD software to select the required components.
All the data generated by the software for the non-standard tool The process of generating the non-standard tool data is as follows: The user or the technician of Walter Titex inputs the required data into the system through the Internet or a local area network. These data include the application range, material, structure (with or without internal cooling, coating). The software uses this information to generate data records containing all parameters of the non-standard tool. Using these data records, the software automatically designs a complete tool and generates a corresponding production program. Then determine when to process. At the same time, the CATexpress production line calculates product costs.
Then, inform the user of the product price and delivery date as soon as possible. At the same time, it also generates all necessary documents, such as 3D models and drawings in dxf, pdf or tdm format. Once the order is placed, the next step is to use the full set of data stored in the bidder's system to schedule the production. Mai explained: “The software creates a list of materials to use, confirms whether there are various parts needed, and then determines when and which machine tooling capabilities are available for processing, and when it can be incorporated into the production process. "All this is done in a matter of minutes. In theory, it takes only 10 minutes to produce finished tools. In fact, each new order that is included in the production process is continuously run within the production line. Mai said: "More than 95% of custom-made products leave our production line within two weeks." This is related to the coating or geometry required for the tool, whether it is a multi-stage tool, or whether it can be used with standard blank production. . This is entirely a matter of logistics and production planning. This shows that the project has been prepared for a long time for continuous optimization before implementation. The company can provide CATexpress in terms of solid carbide drilling tools. But now it has begun to expand this system to include the entire Walter Titex and Walter Prototyp tool series.
Users are particularly interested in whether the system is available worldwide and used in China, Brazil, or other countries in the world. Finished tool production is also completed within two weeks from the time the order is placed. Michael Mai thinks there is no doubt: "CATexpress can enable us to closely track our goals and further strengthen our position in the international market."
It is well known that the application of new materials and the geometry of workpieces are becoming more and more complex, and it is becoming more and more difficult to economically process using standard tools. Its solution is to use non-standard tool processing, a clamping can complete a number of steps. However, in the vast majority of cases, non-standard tools have a long cycle from planning to implementation to delivery. This prompted Walter Titex to study a solution to this increasingly serious problem. With a networked software solution, design, cost estimates, purchase orders, and user file processing can be completed in just a few minutes. According to Mr. Mai, using this system, “multi-stage drills and other tools can be produced in as little as 10 minutes after ordering.†Walter Titex has the basic conditions for necessary production capacity. In order to meet this type of demand, tool specialists have set up a production line that specializes in CATexpress. Mr. Mai emphasized: "The scale of this production line is very large. Even if there is a large demand fluctuation, all production bottlenecks do not occur. It is this way that we can guarantee that users can use the machine tool within 2 weeks after the order is placed. Required tools."
Walter Titex's experts did not turn their attention to production hardware, but instead studied their related logistics issues to optimize the entire system. “For every kind of non-standard tool, although we have not created anything new, we can change the whole approach. Even in non-standard tools, there are still many places where standard parts can be used.†Based on this concept, Walter Titex The experts developed a modular component for the CAD software to select the required components.
All the data generated by the software for the non-standard tool The process of generating the non-standard tool data is as follows: The user or the technician of Walter Titex inputs the required data into the system through the Internet or a local area network. These data include the application range, material, structure (with or without internal cooling, coating). The software uses this information to generate data records containing all parameters of the non-standard tool. Using these data records, the software automatically designs a complete tool and generates a corresponding production program. Then determine when to process. At the same time, the CATexpress production line calculates product costs.
Then, inform the user of the product price and delivery date as soon as possible. At the same time, it also generates all necessary documents, such as 3D models and drawings in dxf, pdf or tdm format. Once the order is placed, the next step is to use the full set of data stored in the bidder's system to schedule the production. Mai explained: “The software creates a list of materials to use, confirms whether there are various parts needed, and then determines when and which machine tooling capabilities are available for processing, and when it can be incorporated into the production process. "All this is done in a matter of minutes. In theory, it takes only 10 minutes to produce finished tools. In fact, each new order that is included in the production process is continuously run within the production line. Mai said: "More than 95% of custom-made products leave our production line within two weeks." This is related to the coating or geometry required for the tool, whether it is a multi-stage tool, or whether it can be used with standard blank production. . This is entirely a matter of logistics and production planning. This shows that the project has been prepared for a long time for continuous optimization before implementation. The company can provide CATexpress in terms of solid carbide drilling tools. But now it has begun to expand this system to include the entire Walter Titex and Walter Prototyp tool series.
Users are particularly interested in whether the system is available worldwide and used in China, Brazil, or other countries in the world. Finished tool production is also completed within two weeks from the time the order is placed. Michael Mai thinks there is no doubt: "CATexpress can enable us to closely track our goals and further strengthen our position in the international market."
Permanent Magent VSD Screw Air Compreessor
Permanent magnet variable frequency screw compressors can maintain high output efficiency at low rotate speed. The greater the fluctuation of air volume in the system, the more obvious energy saving effect is. LGM series permanent magnet frequency conversion screw air compressors adopt permanent magnet (IPM) motor with huge energy saving efficiency and superior performance. When used with dedicated servo drivers together, they will give full play to the incomparably energy-saving effect than general induction motors. According to the exhaust temperature, cooling fan with variable frequency control can control the fan rotate speed to prevent power waste, reduce noise and stabilize the system. Through wide range control, the maximum amount of air displacement is increased by about 16%.
Permanent Magent Vsd Screw Air Compreessor,Pm Vsd Screw Air Compressor,Vsd Oil Cooled Rotary Screw Air Compressor,Vsd Variable Screw Air Compressor
Quzhou Able Machinery Equipment CO., LTD. , https://www.able-machine.com