Bx100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor

BX100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor 


Introduction

1.BX100 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry.
2.The BX100 series only 45 KG, can easily put it in the trunk of the car , carry to use the site.
3.It can be used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields.
4.Convenient to move, easy operation, and the high pressure air compression manufacturing meet EN 12021 international breathing compressed air standard.
5.The oil and contaminants in the compressed air are removed by filters and  oil- moisture separators in the duration of compression,so the outlet air is pure and odorless.It is safe and reliable breathing air supply machine.

Product Structure:   
1.Optional gasoline engine, three-phase, 4-stage-phase electric drive motor, V belt drive
2.Four cylinder level 4 high-pressure compressor
3.Specially treated alloy cylinder and pistons
4.Installed in the 400 bar high pressure on the compressor pressure gauge .
5.1.2 meters high pressure air tube, joints according to the needs of you
6.High temperature resistance plastic blowing steel frame
7.Manual stopping device
8.Precision air-intake filter
9.High-strength Stainless steel fan cover
10.Two oil-water separator, two drain valve (optional automatic decontamination)
11.Activated carbon molecular sieve filtration system
12.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure
13.Terminal safety valve pressure stepless adjustment
14.To set pressure automatic stop, prevent the relief valve frequent rev.Jump, ensure safety and security

Specification for Scuba Diving Breathing 300bar Air Compressor :
 


  

  BX100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor 


Introduction

1.BX100 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry.
2.The BX100 series only 45 KG, can easily put it in the trunk of the car , carry to use the site.
3.It can be used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields.
4.Convenient to move, easy operation, and the high pressure air compression manufacturing meet EN 12021 international breathing compressed air standard.
5.The oil and contaminants in the compressed air are removed by filters and  oil- moisture separators in the duration of compression,so the outlet air is pure and odorless.It is safe and reliable breathing air supply machine.

Product Structure:   
1.Optional gasoline engine, three-phase, 4-stage-phase electric drive motor, V belt drive
2.Four cylinder level 4 high-pressure compressor
3.Specially treated alloy cylinder and pistons
4.Installed in the 400 bar high pressure on the compressor pressure gauge .
5.1.2 meters high pressure air tube, joints according to the needs of you
6.High temperature resistance plastic blowing steel frame
7.Manual stopping device
8.Precision air-intake filter
9.High-strength Stainless steel fan cover
10.Two oil-water separator, two drain valve (optional automatic decontamination)
11.Activated carbon molecular sieve filtration system
12.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure
13.Terminal safety valve pressure stepless adjustment
14.To set pressure automatic stop, prevent the relief valve frequent rev.Jump, ensure safety and security

Specification for Scuba Diving Breathing 300bar Air Compressor :
 


  

 

Anti-wear Ring

Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.

Wear ring for excavator,For excavator track,For excavator accessories

Safe Seal Technology Co., Ltd. , https://www.jolseals.com