3HP to 50HP Industrial Water Chiller for Plastic Industry

Specifications: 
Notes: 1. Cooling capacity is based on: Chiller water inlet and outlet water temperature of 12ºC/7ºC, the cooling water inlet and outlet water temperature of 30ºC/35ºC
2. Scope of work: Chilled water temperature range: 5ºCTO35ºC; Chiller water out of the water temperature: 3ºCTO8ºC
The cooling temperature is not higher than 35ºC environment
The above can be customized according to customer requirements to produce
Specification dimension above are subject to change without notice












Our Services: 
ØWith decades years professional experience in refrigeration industry; 
ØOEM/ODM services available, new design updates regularly; 
ØWe offer all of products with 12 months warranty; 
ØPrompt reply, fast delivery, professional after-sales service. 

FAQ: 
1. How to choose a proper Chiller? 
Tip1. The cooling capacity. 
Tip2. The inlet and outlet water temperature, and the environment temperature. 
Tip3. The power. 
Tip4. The rifrigeration you need. 
Tip5. Other special requirments. 
2. If the cooling capacity of Chiller bigger is better? 
No. 
The use of cooling capacity too large, will not only result in the waste of resources, but also the machine itself will produce more noise, therefore we must choose a appropriate chiller. 

Tungsten Carbide Roll Rings

Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength.
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.

Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtccarbide.com